Escape Hiking Pack
The Escape Backpack is a large capacity, canvas top loading pack made for multi-day walks. Hardwearing construction, excellent weight dispersion, fine-tune adjustment and versatile packing options.
- Highly adjustable Moto Active Harness System
- New body fit profile for carrying comfort
- Front expandable pleated pocket
- Front stretch pocket
- Dual layer, large capacity side pockets: first layer pocket for access while wearing, second layer pocket with top access
- Dual vertical daisy chain webbing
- Dual side compression straps with side release buckles
- Extendable and removable lid with hip-belt attachment points
- Quick draw closure on Nylon storm throat
- Shoulder strap stash pocket
- Water bladder compatible with bladder hose exit ports for either shoulder strap
- Dual ice axe/walking pole attachment straps
- Front and rear packing/haul handles
- Built from Australian made, poly/cotton Infinity Corespun canvas
- 470 denier Cordura wear points, backed with Infinity Corespun
- Dual layer base with 980 denier Cordura face and Infinity Corespun Canvas inner
- 210 denier double-ripstop Nylon storm throat
- High quality Nylon twill webbings
- YKK brand zips
- Duraflex and ITW Nylon buckles
- Capacity: 65-75 Litres
- Weight: 2.8kg - 3.01kg
- Fabric: Infinity Corespun Canvas / 470D Cordura Nylon
Moto Active Harness System
The Moto Active Harness System provides load bearing comfort for mid to high volume packs.
- Contoured Shoulder Straps. Shoulder straps map the curves of your torso and provide stability and comfort on the longest of walks.
- Dual Vertical & Single Horizontal Hollow Core Stays. Weight is transferred directly to the hip-belt via two hollow-core aluminium stays. Hollow-core stays are 20% lighter and 25% stronger than previously used extruded aluminium stays.
- Multilayer Foam Hip Belt. Moto Active contoured hip-belt with 8 layer construction: open and closed cell foams, HTPE sheet and highly durable Cordura Nylon.
- V-Ridge Foam. Stay cooler with the ventilated, non-moisture-absorbing, V-Ridge Foam back panel.
- Single Point Adjustment. Adjust the back length with one simple change.
BACKPACK FITTING GUIDE
|BACK LENGTH (CM)||35-45||40-50||45-55||50-60|
|BACK LENGTH (INCH)||13.5-17.5||15.5-19.5||17.5-21.5||19.5-23.5|
FINDING YOUR BACK LENGTH
To determine your harness size you will need to know your back length. Measuring your back length is easy with the help of a friend.
Measure from your C7 vertebrae down your spine to the point level with the top of your hipbones, the iliac crest.
The C7 vertebrae is the one that sticks out prominently at the back of your neck when you tilt your head forward.
Once you know your harness size it is important to fit the pack correctly. A correctly fitted pack is essential for load carrying comfort.
- Put the pack on, loosen all of the straps and tighten the hip-belt until firm. The middle of the hip-belt pads should wrap snugly over your hips.
Next, tighten the shoulder straps under your arms, then the stabiliser straps between the tops of the shoulders and the top of the pack frame.
With the hip-belt hugging your hip bones the shoulder straps should wrap comfortably over your shoulders without excess pressure.
If the shoulder straps are too tight on your shoulders or sitting loosely above your shoulders, you will need to adjust the harness back length. This is done by tightening or loosening the webbing strap recessed between the shoulder straps at the top of the harness.
For previous model MotoActive and NovoLite harnesses the back length is adjustment is above the lumbar pad or recessed beside the lumbar pad and behind a hip belt.
The curvature of the stays may also need adjusting. Inside the pack is a flap covering the top of the aluminium stay/s. Pull back the flap, pull out the stay and shape it to fit.
Finally, tighten the stabiliser straps between the hip-belt and the base of the pack.
With light to moderate loads you may not need to use the sternum strap, but for heavy loads the sternum strap will provide extra stability.
The best way to evaluate your harness fitting is to load the pack up with about 12kg and go for a wander. A correctly fitted pack will distribute a majority of the weight comfortably on your hips via the hip-belt, the shoulder straps are largely for stability.